Company
Aaradhyaa & Co.
Location
Mumbai, Maharashtra
Salary
₹18K–₹22K a month
Posted
2 days ago
Via
Apna Jobs
Apply on
Job description
ITI Technician – Operation & Maintenance (Pumping Station)
Location:
Mumbai
Experience Required:
Minimum 5 years in operation and maintenance of pumping stations / water / wastewater / storm water / industrial pumping systems
Qualification:
ITI in Electrician / Wireman / Fitter / Pump Mechanic / Maintenance Technician / Diesel Mechanic
Additional certifications in electrical safety / panel operation / motor maintenance / DG operation will be preferred
Job Summary
We are looking for an experienced ITI Technician for operation, monitoring, preventive maintenance, and breakdown maintenance of storm water pumping station equipment in Mumbai. The candidate should have hands-on experience in handling pumps, motors, valves, panels, DG sets, HT/LT systems, dewatering systems, and routine station upkeep to ensure uninterrupted operation, especially during monsoon emergencies.
Key Responsibilities
1. Operation of Pumping Station
Operate and monitor storm water / dewatering / sewage / drainage pumps as per shift requirements
Start, stop, and changeover pumps, motors, and auxiliaries as per SOP
Monitor pump performance, pressure, discharge, vibration, noise, temperature, and current load
Ensure smooth operation during heavy rainfall / emergency flooding conditions
2. Electrical & Mechanical Maintenance
Carry out routine preventive maintenance of:
Pumps
Electric motors
Bearings
Couplings
Valves / sluice gates / flap gates
Pipelines and fittings
LT panels / starters / MCC panels
Soft starters / VFD (if installed)
DG sets and fuel systems
Attend breakdown maintenance and restore equipment at the earliest
Check and tighten cable terminations, glands, earthing, and panel connections
Assist in dismantling, alignment, reassembly, greasing, oiling, and replacement of worn parts
3. Inspection & Monitoring
Conduct regular inspection rounds of complete pumping station equipment
Maintain log of:
Running hours
Voltage / current readings
Pump discharge status
DG operation hours
Fuel levels
Breakdown observations
Water levels / sump levels
Identify abnormalities and report immediately to Plant Incharge / Supervisor
4. Emergency / Monsoon Duty
Remain available for 24x7 shift / emergency monsoon deployment
Attend urgent failures during high rainfall and flooding situations
Support quick restoration of pumping station during critical hours
Coordinate with site incharge for uninterrupted dewatering / drainage operation
5. Housekeeping & Safety
Ensure good housekeeping of pump house, panel room, DG area, and control room
Follow safety procedures while working on electrical and rotating equipment
Use proper PPE during operation and maintenance work
Ensure no oil leakage, cable damage, unsafe wiring, or water ingress in panels
Maintain tools, tackles, spares, and consumables properly
6. Record Keeping
Maintain daily shift reports and maintenance checklists
Record preventive maintenance activities and breakdown reports
Maintain stock record of basic consumables and spares such as:
Grease
Lubricants
Gaskets
Fasteners
Cable lugs
Fuses / MCB / contactors (where applicable)
Location:
Mumbai
Experience Required:
Minimum 5 years in operation and maintenance of pumping stations / water / wastewater / storm water / industrial pumping systems
Qualification:
ITI in Electrician / Wireman / Fitter / Pump Mechanic / Maintenance Technician / Diesel Mechanic
Additional certifications in electrical safety / panel operation / motor maintenance / DG operation will be preferred
Job Summary
We are looking for an experienced ITI Technician for operation, monitoring, preventive maintenance, and breakdown maintenance of storm water pumping station equipment in Mumbai. The candidate should have hands-on experience in handling pumps, motors, valves, panels, DG sets, HT/LT systems, dewatering systems, and routine station upkeep to ensure uninterrupted operation, especially during monsoon emergencies.
Key Responsibilities
1. Operation of Pumping Station
Operate and monitor storm water / dewatering / sewage / drainage pumps as per shift requirements
Start, stop, and changeover pumps, motors, and auxiliaries as per SOP
Monitor pump performance, pressure, discharge, vibration, noise, temperature, and current load
Ensure smooth operation during heavy rainfall / emergency flooding conditions
2. Electrical & Mechanical Maintenance
Carry out routine preventive maintenance of:
Pumps
Electric motors
Bearings
Couplings
Valves / sluice gates / flap gates
Pipelines and fittings
LT panels / starters / MCC panels
Soft starters / VFD (if installed)
DG sets and fuel systems
Attend breakdown maintenance and restore equipment at the earliest
Check and tighten cable terminations, glands, earthing, and panel connections
Assist in dismantling, alignment, reassembly, greasing, oiling, and replacement of worn parts
3. Inspection & Monitoring
Conduct regular inspection rounds of complete pumping station equipment
Maintain log of:
Running hours
Voltage / current readings
Pump discharge status
DG operation hours
Fuel levels
Breakdown observations
Water levels / sump levels
Identify abnormalities and report immediately to Plant Incharge / Supervisor
4. Emergency / Monsoon Duty
Remain available for 24x7 shift / emergency monsoon deployment
Attend urgent failures during high rainfall and flooding situations
Support quick restoration of pumping station during critical hours
Coordinate with site incharge for uninterrupted dewatering / drainage operation
5. Housekeeping & Safety
Ensure good housekeeping of pump house, panel room, DG area, and control room
Follow safety procedures while working on electrical and rotating equipment
Use proper PPE during operation and maintenance work
Ensure no oil leakage, cable damage, unsafe wiring, or water ingress in panels
Maintain tools, tackles, spares, and consumables properly
6. Record Keeping
Maintain daily shift reports and maintenance checklists
Record preventive maintenance activities and breakdown reports
Maintain stock record of basic consumables and spares such as:
Grease
Lubricants
Gaskets
Fasteners
Cable lugs
Fuses / MCB / contactors (where applicable)
More jobs
Arg Welder - Kondhwa Pune Superior Hydrolique Pvt Ltd ₹1L–₹2.5L a year 3 days ago Welder TIG Vighnharta Corporation 15 hours ago Welder Ronak Fire Industries ₹15K–₹25K a month 1 month ago Structural Steel Fabricator Welder (MIG & FCAW) 2coms 17 hours ago Tig Welder unique solution ₹2.4L–₹3L a month 16 hours ago Urgent Welder Hiring - ITI Pass-out Growth Salary Pro National Registry 4 days agoFrequently asked questions
Quick answers about Welder Jobs in India
Q
What is the minimum wage for a skilled welder in Delhi as of 2026?
As per the Ministry of Labour & Employment notifications, the minimum wage for a skilled welder in Delhi is Rs 27,200 per month for a 26-day, 8-hour shift schedule effective April 2026. This includes basic wage of Rs 11,500 plus Variable Dearness Allowance of Rs 15,700 indexed to CPI. Overtime is paid at twice the ordinary rate for hours beyond 48 per week.
Source: Ministry of Labour & Employment
Q
What qualifications are required for welder jobs in government sectors in India?
As per the Directorate General of Training, a National Trade Certificate (NTC) in Welder (Gas & Electric) trade from an ITI with at least 60% marks is mandatory for entry-level government welder positions. Candidates need 10th standard pass and 1-year ITI training duration. Apprenticeship under NAPS is required post-ITI for 6-12 months.
Source: Directorate General of Training
Q
How do I apply for welder jobs through government portals and what documents are needed?
As per the National Career Service, register on ncs.gov.in with Aadhaar, PAN, bank details, and upload ITI certificate, 10th marksheet, and experience letters if any. Select 'Welder' under trades and apply to verified vacancies from PSUs like BHEL. Shortlisted candidates submit originals at employment exchanges within 7 days of call letter.
Source: National Career Service
Q
What are the working hours, leave entitlements, and benefits for welders in factories?
As per the Ministry of Labour & Employment under Factories Act 1948, welders work 48 hours per week with one weekly off and overtime at 2x rate. Annual leave is 1 day for every 20 days worked, up to 15 days, plus 12 casual/sick leave days. Establishments with 10+ workers provide ESI health insurance and EPF at 12% of Rs 15,000 wage cap.
Source: Ministry of Labour & Employment