Company
UMULIG ENGINEERING
Location
City of Johannesburg Metropolitan Municipality
Posted
15 days ago
Via
via BeBee
Apply on
Job description
Semi-Skilled Plastic Welder X 1
Job Title: Semi-Skilled Plastic Welder
Department: Fabrication / Assembly
Reports To: Welding Supervisor
Employment Type: Part-time, Hourly
Job Summary
We are looking for a motivated Semi-Skilled Plastic Welder to join our fabrication team. In this role, you will assist senior plastic welders in the assembly and repair of thermoplastic components (such as tanks, ductwork, linings, and piping). You will be responsible for basic welding operations, surface preparation, and equipment setup. The ideal candidate has a basic understanding of heat welding principles and a strong mechanical aptitude.
Key Responsibilities
• Preparation: Clean, bevel, and fit plastic components (Polypropylene, PVC, HDPE, PVDF) prior to welding.
• Basic Welding: Perform socket fusion welding, electro-fusion welding & butt fusion welding as well as flat and simple fillet welds using hot air guns, extrusion welders, and hand rods under the guidance of a certified welder.
• Equipment Setup: Turn on, calibrate temperature settings, and test air flow on welding equipment to ensure proper adhesion.
• Quality Checks: Inspects welds for common visual defects (burn marks, lack of fusion, voids) and reports any issues to the supervisor.
• Fixture Use: Secures parts using clamps, jigs, or machine clamping devices.
• Safety Compliance: Adheres to all site safety protocols, including fume extraction, heat hazard prevention, and proper handling of chemicals.
• Maintenance: Cleans and maintains welding equipment and workstations.
Required Skills & Qualifications
• Experience: 1+ years of experience in plastic fabrication, general welding, or a related industrial assembly role.
• Material Knowledge: Ability to identify common plastics (PVC, Polypropylene, HDPE) vs. non-weldable plastics.
• Manual Dexterity: Steady hands and the ability to control welding speed/heat simultaneously.
• Math/Measuring: Ability to read a tape measure, square, and protractor.
• Physical Stamina: Ability to stand for 8-hour shifts, bend, kneel, and lift up to 25 kgs
• PPE: Must be willing to wear safety glasses, heat-resistant gloves, and a respirator when required.
Preferred (But Not Required)
• Matric certificate/NCV Level 4
• Experience with plastic shears/cutters, plastic pipe heat fusion machinery
• Forklift certification.
Working Conditions
• On-site; may be exposed to moderate noise, heat from tools, and plastic fumes (ventilation provided).
• Occasional overtime or weekend shifts to meet production deadlines.
Compensation
• Hourly market rate commensurate with experience
• Overtime pay as per South African local labour laws.
Location
• Johannesburg, East Rand
Application:
Applications must be emailed to: recruitment@umulig.co.za The following documents are a required:
• CV outlining qualifications and experience
• Certified Matric/Equivalent certificate
• Any relevant industry certificates (Certified)
• Certified ID copy
• Certified Passport copy
Job Title: Semi-Skilled Plastic Welder
Department: Fabrication / Assembly
Reports To: Welding Supervisor
Employment Type: Part-time, Hourly
Job Summary
We are looking for a motivated Semi-Skilled Plastic Welder to join our fabrication team. In this role, you will assist senior plastic welders in the assembly and repair of thermoplastic components (such as tanks, ductwork, linings, and piping). You will be responsible for basic welding operations, surface preparation, and equipment setup. The ideal candidate has a basic understanding of heat welding principles and a strong mechanical aptitude.
Key Responsibilities
• Preparation: Clean, bevel, and fit plastic components (Polypropylene, PVC, HDPE, PVDF) prior to welding.
• Basic Welding: Perform socket fusion welding, electro-fusion welding & butt fusion welding as well as flat and simple fillet welds using hot air guns, extrusion welders, and hand rods under the guidance of a certified welder.
• Equipment Setup: Turn on, calibrate temperature settings, and test air flow on welding equipment to ensure proper adhesion.
• Quality Checks: Inspects welds for common visual defects (burn marks, lack of fusion, voids) and reports any issues to the supervisor.
• Fixture Use: Secures parts using clamps, jigs, or machine clamping devices.
• Safety Compliance: Adheres to all site safety protocols, including fume extraction, heat hazard prevention, and proper handling of chemicals.
• Maintenance: Cleans and maintains welding equipment and workstations.
Required Skills & Qualifications
• Experience: 1+ years of experience in plastic fabrication, general welding, or a related industrial assembly role.
• Material Knowledge: Ability to identify common plastics (PVC, Polypropylene, HDPE) vs. non-weldable plastics.
• Manual Dexterity: Steady hands and the ability to control welding speed/heat simultaneously.
• Math/Measuring: Ability to read a tape measure, square, and protractor.
• Physical Stamina: Ability to stand for 8-hour shifts, bend, kneel, and lift up to 25 kgs
• PPE: Must be willing to wear safety glasses, heat-resistant gloves, and a respirator when required.
Preferred (But Not Required)
• Matric certificate/NCV Level 4
• Experience with plastic shears/cutters, plastic pipe heat fusion machinery
• Forklift certification.
Working Conditions
• On-site; may be exposed to moderate noise, heat from tools, and plastic fumes (ventilation provided).
• Occasional overtime or weekend shifts to meet production deadlines.
Compensation
• Hourly market rate commensurate with experience
• Overtime pay as per South African local labour laws.
Location
• Johannesburg, East Rand
Application:
Applications must be emailed to: recruitment@umulig.co.za The following documents are a required:
• CV outlining qualifications and experience
• Certified Matric/Equivalent certificate
• Any relevant industry certificates (Certified)
• Certified ID copy
• Certified Passport copy
More jobs
Qualified Welder Adlam Engineering (Pty) Ltd 9 days ago Welder Telebest Welder Jobs SSS Steel Structures 2 days ago Welders/ General Labour in Construction Wanted Imvusa Projects General Welder Objectivepersonnel 2 days ago Boilermaker/Welder Continam Industrial Services CC 15 days agoFrequently asked questions
Quick answers about Welder Jobs in South Africa
Q
What is the minimum wage for welders in South Africa in 2026?
As per the Department of Employment and Labour, the national minimum wage increased to R31.20 per hour effective 1 March 2026, equating to R12,870 per month for a standard 45-hour week. Welders covered by the Metal and Engineering Industries Bargaining Council earn a minimum of R35,678 per month for qualified artisans. Overtime is paid at 1.5 times the normal rate for hours exceeding 45 per week.
Source: Department of Employment and Labour
Q
What work visa do foreign welders need to work in South Africa in 2026?
Foreign welders require a General Work Visa from the Department of Home Affairs, which needs a job offer from a South African employer and proof of qualifications. The application fee is R1,520, and processing takes 8-10 weeks as of 2026. Welding is not on the Critical Skills List, so a corporate permit or labour market test is mandatory.
Source: Department of Home Affairs
Q
What qualifications and experience are required for welder jobs in South Africa in 2026?
The Quality Council for Trades and Occupations requires a National Certificate (Vocational) NQF Level 4 in Welding or Grade 12 plus a successful trade test for artisan status. Entry-level positions need 1-2 years of apprenticeship experience, while qualified welders must hold a Red Seal endorsement. Unqualified applicants can start as assistants at R18,500 per month.
Source: Quality Council for Trades and Occupations
Q
What documents are needed to apply for welder jobs in South Africa?
Applications require a certified ID copy, matric certificate, trade test certificate from an accredited centre, and CV with references as per Department of Employment and Labour guidelines. For trade test registration, submit N2 technical certificate and medical fitness report. Employers must verify documents via uFiling portal before hiring.
Source: Department of Employment and Labour