Company
Feldmeier Equipment Inc.
Location
New York, NY
Job type
Full-time
Posted
5 days ago
Via
via Jooble
Apply on
Job description
Description
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
More jobs
Shipyard Fitter/Welder Aerotek 45 an hour 20 hours ago Welder 2nd & 3rd Shift Gorbel 23 days ago Structural Welder **$180/day per diem** Craft and Technical Solutions, LLC 1 day ago Trailer Welder: Blueprint Welds + $1k Retention Bonus Rc Trailer 2 days ago Entry-Level Welder|$28/hr Helion Group 28 an hour 2 days ago Production Welder Rio Marine 2 days agoFrequently asked questions
Quick answers about Welder Jobs in United States
Q
What is the starting salary for entry-level welder jobs in the US in 2026?
The Bureau of Labor Statistics reports the 10th percentile annual wage for welders, cutters, solderers, and brazers at $38,700, or $18.60 per hour, as projected for 2026. Most entry-level positions require on-the-job training and pay between $18.60 and $22.00 per hour depending on location. Overtime pay is at least 1.5 times the regular rate over 40 hours per week.
Source: U.S. Bureau of Labor Statistics
Q
What work visa do I need as a foreign welder to work in the US in 2026?
Foreign welders can apply for H-2B temporary non-agricultural work visas, requiring a temporary labor certification from DOL valid for up to 12 months. USCIS approves H-2B petitions with a FY2026 cap of 68,500 visas after exemptions. Employers must prove no US workers available and pay prevailing wage of at least $24.50 per hour.
Source: U.S. Citizenship and Immigration Services
Q
What education and experience do I need to qualify for welder jobs in 2026?
A high school diploma or equivalent is required, plus 3 to 6 months of on-the-job training or a DOL-registered apprenticeship program lasting 1-2 years. No college degree is needed, but 1-2 years of experience boosts hiring chances. About 49,800 annual openings are projected through 2033 for qualified candidates.
Source: U.S. Bureau of Labor Statistics
Q
What documents are required to apply for welder jobs through US government programs?
Submit a resume, high school diploma, proof of apprenticeship completion via DOL Registered Apprenticeship ID, and AWS certification if held. For federal contractor jobs, include Form ETA-9062 for compliance. Applications via Apprenticeship.gov require SSN and training hours log.
Source: U.S. Department of Labor Employment and Training Administration