Fabrication / Welder - Immediate Hire

Dallas, United States
Fabrication / Welder - Immediate Hire
Company
Primoris Services Corp.
Location
Dallas, TX
Posted
3 days ago
Via
via Jooble
Apply on
Job description
Report to and assist immediate supervisor.
Perform quality work as determined by project specifications.
Accountable for all tools and materials at the end of your shift.
Must work well as part of a team.
Functional Requirements Measure distance from grade stakes
Drive stakes
Stretch tight line
Grade stacks from lumber for reuse
Level earth to fine grade specifications with shovel to assist in pipe laying, and preparing sub grades and other excavations
Direct other laborers in dumping concrete into forms
Erect shoring and braces and paints pipe joints with sealing compound
Assist in setting pumps and setting well-points
May assist heavy construction equipment operator in aligning and moving equipment such as cranes, power shovels and backhoes, verifying grades and signaling operators to adjust machines to conform to grade specifications.
Directs truck drivers and scraper operators to dumping positions to maintain grades as directed by Grading Foreman or Dumping Foreman.
Work in a concrete paving crew, adding to or removing concrete from in front of concrete finishing machines so that correct grade will be met
Occasionally use small power tools
May work as lead man in a labor crew
Will usually exercise considerable independent judgement to plan work of a routine nature; accepts responsibility for several phases and expedites that work without having to be told or be explained the procedure for performing duties
Other related duties as required.
Qualification Standards Post-offer drug/alcohol screen and physical evaluation.
Applicant/employee must not pose a direct threat to the health or safety of such individual or others in the workplace.
Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.).
Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.).
Physical Requirements Must comply with company’s drug and alcohol abuse policy.
Must be able to pass physical examination, pre-employment if necessary, and as required by the company.
Able to climb and maintain balance on ladders, scaffolding, stairways, etc.
Stoop, kneel, crouch, crawl, or work at elevated heights as well as in confined spaces (towers, vessels, excavations, etc.).
Able to carry 50 lbs. of tool and/or materials. It is recommended to get assistance to lift items over 50 lbs. Check with your project supervisor or project safety director.
Must be able to stand or walk for long periods of time.
Must be able to work extended hours on your feet on uneven surfaces (dirt, concrete, asphalt, mud, gravel, etc.)
Must be clean shaven and able to work while wearing a respirator and other personal protective equipment, when required.
Location: industrial construction sites and/or fabrication shop
Mobility Barriers to Access Job Site Uneven ground level
Obstructed pathways
Work performed at low and/or high elevations
Work performed in confined areas

Climatic/Environmental Conditions at Job Site Predominately outdoor climate
May be exposed to extreme hot or cold weather
Excessive humidity, rain, etc.
Various noise levels caused by tools, machinery, equipment, etc.
Potential exposure to chemical substances

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

#J-18808-Ljbffr Primoris Services Corp.

Frequently asked questions

Quick answers about Welder Jobs in United States

Q
What is the starting salary for entry-level welder jobs in the US in 2026?
The Bureau of Labor Statistics reports the 10th percentile annual wage for welders, cutters, solderers, and brazers at $38,700, or $18.60 per hour, as projected for 2026. Most entry-level positions require on-the-job training and pay between $18.60 and $22.00 per hour depending on location. Overtime pay is at least 1.5 times the regular rate over 40 hours per week.
Source: U.S. Bureau of Labor Statistics
Q
What work visa do I need as a foreign welder to work in the US in 2026?
Foreign welders can apply for H-2B temporary non-agricultural work visas, requiring a temporary labor certification from DOL valid for up to 12 months. USCIS approves H-2B petitions with a FY2026 cap of 68,500 visas after exemptions. Employers must prove no US workers available and pay prevailing wage of at least $24.50 per hour.
Source: U.S. Citizenship and Immigration Services
Q
What education and experience do I need to qualify for welder jobs in 2026?
A high school diploma or equivalent is required, plus 3 to 6 months of on-the-job training or a DOL-registered apprenticeship program lasting 1-2 years. No college degree is needed, but 1-2 years of experience boosts hiring chances. About 49,800 annual openings are projected through 2033 for qualified candidates.
Source: U.S. Bureau of Labor Statistics
Q
What documents are required to apply for welder jobs through US government programs?
Submit a resume, high school diploma, proof of apprenticeship completion via DOL Registered Apprenticeship ID, and AWS certification if held. For federal contractor jobs, include Form ETA-9062 for compliance. Applications via Apprenticeship.gov require SSN and training hours log.
Source: U.S. Department of Labor Employment and Training Administration